This sounds very much like a problem that I'm having as well (alhtough I'm not getting the beeps) ... please see my recent post titled "BE6-2 No video signal periodically". By chance are you also using an Abit BE6-II motherboard or even any Abit board? What video card are you using? Just a side note, you can probably turn the computer off without pulling the plug by holding in the power button for 5 - 10 seconds. I really must try your technique of opening the CD-ROM drive doors, what led you to do this? Bill Nussbaumer On Tue, 31 Oct 2000 20:05:57 -0600, Paul A. Valentine <[log in to unmask]> wrote: >My computer has developed what I suspect is a hardware problem. When I push >the power button to turn it on, the power light comes on, the hard drive >light comes on, it immediately emits one long beeb, and two fast short >beeps, the cd-rom lights briefly as does the A drive and the cdrw drive. The >hard drive light stays on for about a minute, then goes off, but nothing >more happens. The display does not come on. If I turn it on manually, it is >not getting a signal. The only way to power it down is to pull the plug. >Sometimes if I hit reset it will start normally, and run normally. Today >that didn't work. I opened and closed both cd drives, then hit reset, and it >started???? >Need help???? >Thanks, Paul Visit our website regularly for FAQs, articles, how-to's, tech tips and much more http://nospin.com - http://nospin.org