From: Matthew Campbell <[log in to unmask]>
Subject: Announcing ZipSpeak: A Talking Mini-Distribution of
Linux
Announcing ZipSpeak:
A Talking Mini-Distribution of Linux
Introduction:
ZipSpeak is a talking mini-distribution of Linux for blind and
visually impaired people, based on version 7.0 of the ZipSlack
distribution and version 0.08 of the Speakup screen reader. ZipSpeak
is designed to be easily installed on an existing MS-DOS or Windows
system, so that the user can start using a talking Linux system with a
minimum of difficulty.
The standard version of ZipSpeak consists of a ZIP file which contains
the main distribution; a set of Linux kernels which have Speakup built
in, one for each supported speech synthesizer; a set of boot disk
images for these kernels, along with an image that doesn't include
Speakup; a utility for making boot disks from these images; and some
documentation. There are also customized versions of ZipSpeak in
which the appropriate kernel for a specific speech synthesizer is
included in the ZIP file, and the boot disk for that synthesizer is
the only included talking boot disk.
What You Need to Use ZipSpeak:
You need a PC with an Intel 80386 processor or better, with at least
four megabytes of RAM, though more RAM is certainly recommended. (For
more information about running ZipSpeak with four megabytes of RAM,
see the fourmeg.README file in the ZipSpeak distribution.) ZipSpeak
requires at least 100 megabytes of hard disk space, though more is
recommended. You also need one of the following hardware speech
synthesizers: Accent-PC, Accent-SA, DoubleTalk-PC, DoubleTalk-LT, or
Speakout, or any synthesizer that is compatible with one of these.
Finally, you need a system running MS-DOS or any version of Windows,
though Windows NT with the NTFS file system will not work.
What You Do Not Need to Use ZipSpeak:
You do not need to back up, repartition, or reformat your hard disk to
run ZipSpeak; it will install on your current DOS or Windows system
(except for Windows NT with NTFS). You do not need a sighted person
to help you with the installation or startup of the system; you can do
it all independently with speech feedback.
Where to Get ZipSpeak:
The standard version is available at:
ftp://ftp.braille.uwo.ca/pub/speakup/disks/slackware/zipspeak/
A customized version for any supported synthesizer is available on
request from me and will probably also be available on CD-ROM in the
near future.
For Further Information:
ZipSpeak is based on ZipSlack, which is a simplified version of the
larger Slackware Linux distribution, created and maintained by Patrick
Volkerding. To find out more about Slackware, check out its Web site
at: http://www.slackware.com/
ZipSpeak uses the Speakup screen reader, written by Kirk Reiser and
Andy Berdan, to provide speech feedback under Linux. Speakup is built
into the Linux kernel itself, so that everything on the console from
boot-up to shutdown is spoken. Speakup will be especially familiar to
people who use or have used the Automatic Screen Access Program (ASAP)
from MicroTalk under MS-DOS. To find out more about Speakup, check
out its Web site at: http://www.braille.uwo.ca/speakup/
Finally, new blind users of Linux can join the blinux-newbie mailing
list to ask questions and discuss any issues related to Linux use by
blind people. More experienced Linux users are also welcome to join
and help out. To join, send a blank message to:
[log in to unmask]
Final Comments:
I am posting this announcement to the speakup, blinux, and
blinux-newbie lists, and to Patrick Volkerding, the maintainer of
Slackware. Feel free to pass on this announcement to any other people
or mailing lists that might be interested. If you have any questions
or comments, feel free to email them to me.
Thanks to Mark Senk in Pittsburgh for motivating me to work on this
project and making suggestions along the way, and to the creators of
ZipSlack and Speakup for making ZipSpeak possible.
--
Matt Campbell <[log in to unmask]>
Web site: http://www.crosswinds.net/~mattcamp/
ICQ #: 33005941
------------------------------------------------------------------------
To Post a message, send it to: [log in to unmask]
To Unsubscribe, send a blank message to: [log in to unmask]
------------------------------------------------------------------------
Learn more with SmartPlanet. It's a new way of learning online.
SmartPlanet offers hundreds of courses to take on your time,
in your space. Join for FREE today!
http://click.egroups.com/1/1704/3/_/202564/_/953566254/
eGroups.com home: http://www.egroups.com/group/blinux-newbie
http://www.egroups.com - Simplifying group communications
VICUG-L is the Visually Impaired Computer User Group List.
To join or leave the list, send a message to
[log in to unmask] In the body of the message, simply type
"subscribe vicug-l" or "unsubscribe vicug-l" without the quotations.
VICUG-L is archived on the World Wide Web at
http://maelstrom.stjohns.edu/archives/vicug-l.html
|
