Hello again,

        I'm trying to re-install WIN95 on a P100 with a re-formatted 1.2GB
Seagate drive  and I'm still getting the following message:


         SUWIN caused a General Protection Fault in module
         USER.EXE at 0006:005A


I've worked with various suggestions so far to no avail.  To
review----it's not an overclocked chip, not an old drive, I've
swapped out the memory, virus checking is disabled in the BIOS and
the video card is not a Cirrus (it's a Trident).

One thing that I noticed working on it today as opposed to
yesterday----after clicking on the "Close" button at the bottom of
the message----the numbers changed at the end.  After clicking
"Close" 3 or 4 more times, the numbers continued to change but then
the whole screen went to a black screen with the following message:

Standard Mode:  Bad Fault in MS-DOS Extender
Fault: 000D  Stack Dump: 0000 0000 0070  Raw Fault Frame: EC=0000
IP=3AB6
CS=06EF  FL=3202  SP=0000  SS=02C7


        This re-format and re-install is certainly not going as smooth as I
expected!!  Can anybody give me any further advice as to what to
do?  I appreciate the input I've gotten already.  Thanks for your
help!


Harold E. Schumacher, Jr.
--
***********************
*  Know Fear...       *
*     Proverbs 9:10   *
*         <><         *
***********************
Mailto:[log in to unmask]

         The PCSOFT web site always needs good submissions.  If
          you would like to contribute to the website, send any
               software tech tips or software reviews to:
                           [log in to unmask]