If you have windows already installed, rename your win.com file to win.xxx
(x=anything you want), then re-install
----- Original Message -----
From: Harold E. Schumacher, Jr. <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, June 20, 1999 9:35 PM
Subject: [PCSOFT] SUWIN caused GPF....
> Hello again,
>
> I'm trying to re-install WIN95 on a P100 with a re-formatted 1.2GB
> Seagate drive and I'm still getting the following message:
>
>
> SUWIN caused a General Protection Fault in module
> USER.EXE at 0006:005A
>
>
> I've worked with various suggestions so far to no avail. To
> review----it's not an overclocked chip, not an old drive, I've
> swapped out the memory, virus checking is disabled in the BIOS and
> the video card is not a Cirrus (it's a Trident).
>
> One thing that I noticed working on it today as opposed to
> yesterday----after clicking on the "Close" button at the bottom of
> the message----the numbers changed at the end. After clicking
> "Close" 3 or 4 more times, the numbers continued to change but then
> the whole screen went to a black screen with the following message:
>
> Standard Mode: Bad Fault in MS-DOS Extender
> Fault: 000D Stack Dump: 0000 0000 0070 Raw Fault Frame: EC=0000
> IP=3AB6
> CS=06EF FL=3202 SP=0000 SS=02C7
>
>
> This re-format and re-install is certainly not going as smooth as
I
> expected!! Can anybody give me any further advice as to what to
> do? I appreciate the input I've gotten already. Thanks for your
> help!
>
>
> Harold E. Schumacher, Jr.
> --
> ***********************
> * Know Fear... *
> * Proverbs 9:10 *
> * <>< *
> ***********************
> Mailto:[log in to unmask]
>
> The PCSOFT web site always needs good submissions. If
> you would like to contribute to the website, send any
> software tech tips or software reviews to:
> [log in to unmask]
>
PCSOFT maintains many useful files for download
visit our download web page at:
http://nospin.com/pc/files.html
|
