Error - template LAYOUT-DATA-WRAPPER not found

A configuration error was detected in the CGI script; the LAYOUT-DATA-WRAPPER template could not be found.

Error - template STYLE-SHEET not found

A configuration error was detected in the CGI script; the STYLE-SHEET template could not be found.

Error - template SUB-TOP-BANNER not found

A configuration error was detected in the CGI script; the SUB-TOP-BANNER template could not be found.

Subject:	Re: PC-PC data transfer
From:	A&C Thompson <[log in to unmask]>
Reply To:	PCSOFT - Personal Computer software discussion list <[log in to unmask]>
Date:	Wed, 7 Mar 2001 10:19:37 -0700
Content-Type:	text/plain
Parts/Attachments:	text/plain (32 lines)

You don't need any added software, but you may need to add a protocol - I think the following will
auto-add the protocol (can't remember) but adding one later is easy if you need to
.
Connect your null modem cable between parallel ports,( disconnect any printers ) then go to
start/programs/accessories/communications/Direct Cable Connection. You need to set one PC as host
and the other as guest. You'll also have to enable file sharing on BOTH PC's - Control Panel /
Network icon / Configuration tab - 2/3 down the page there's a "File and print sharing" button -
click it and then enable file sharing. Rebbot, then right click on the drives / folders you want to
share and click "sharing". Good luck

Al Thompson

----- Original Message -----
From: "Robert Citkowitz" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 07, 2001 8:37 AM
Subject: [PCSOFT] PC-PC data transfer


> How do I transfer/back up files between desktop and laptop?
>
> I bought a null modem, but don't know how to use it. Do I need any added
> software (running 95)?
>
> Thanks for any help.
>
> Rob

             Do you want to signoff PCSOFT or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcsoft.shtml

ATOM RSS1 RSS2

LISTSERV.ICORS.ORG