----- Original Message -----
From: "Tony Mayer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, May 12, 2003 12:29 AM
Subject: Re: [PCBUILD] USB 2.0

Tony,
    Have removed old drivers, disabled thru the BIOS, literally done
everything that I know or have read and still will not accept new card. Have
tried two different cards, both supposedly XP ready.

Kenny

> Did you disable the USB 1.1 through the BIOS before installing the new
> card?  That might be the problem if you didn't try that already.
>
> Tony Mayer
> Sysop
> The Magic FunHouse BBS
> bbs.magicom.net
>
> Kenny Parks wrote:
> > Ok Folks, I'm starting to feel completely incompetant. I have built many
computers over the last several years. I cannot get a simple USB 2.0 PCI
card installed in my own computer. I have downloaded, disabled, uninstalled,
reinstalled and nothing seems to work. I need step by step help with a
solution. I have XP Pro, Abit KX7-333r motherboard (raid disabled, not
used), 1034 mb DDR 333 ram, Leadtek Nividia Ti 4400 128mb video card. On
board USB 1.1 with 4  extra USB ports running off of motherboard. Just want
to install USB 2.0 and not able to do it. Plug and play recognizes the new
card, starts to install NEC to USB Host drivers, then scree says 'cannot
install this hardware, problem installing USB controller, an error occurred
duing the installation, the data is invalid, click finish to close. This
happens with the installation disc or using the windows drivers with SP-1
update. Getting ready to back up hard drive and get motherboard with 2.0
onboard if solution not found
>  shortly...
> > HELP Please!!!!         Kenny Parks

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml