Hello Listmembers,
I have an Iwill BD100 Mobo with a Celeron 300A, the board jumpers have
markings which indicate speed in mhz, instead of FSB speed and multiplier
settings. it has 233,266,300 and 333(with bus at 66 mhz persumably) and
350,400,450,500(with bus at 100 mhz persumably). Am I correct in thinking
if I set the jumpers at "400", it will be the same as setting the bus at
100 mhz with a 4x multiplier. it's my first overclocking try and wish to be
sure about settings. Any help would be appreciated. TIA
Wayne Aiello
********************************************************
http://www.geocities.com/SiliconValley/Heights/8645
********************************************************
http://www.shaka.com/~riftzone
********************************************************
<[log in to unmask]>
********************************************************
<[log in to unmask]>
********************************************************

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                    http://nospin.com/pc/pcbuild.html