Need more detail.  Were you able to log on to the network?  Have you checked
your network settings?  Have you tried pinging the server to check for
connection? Etc.
----- Original Message -----
From: "Dharam Bhardwaj" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, September 05, 2000 4:33 PM
Subject: [PCBUILD] Network question


> I am attempting to add a Window95 machine into an existing network on a
> Windows 2000 server via TCP/IP. The machine is refusing to see the
> network. The server runs DHCP and has a pool of addresses that are
> assigned dynamicaly . The NIC on the win95 machine is ok. If I add the
> netbeui protocol, then the win95 machine is able to see another win95
> machine but not the server. Without netbeui, there is nothing. The
> windows 95 network settings are the usual, nothing special, for example,
> no ipx, no netbeui. The tcp/ip configuration is the standard stuff -
> wins resolution is disabled, gateway is blank, dns is disabled, ip
> address is obtained automatically. In fact, the other win95 machine with
> similar settings has worked fine for a long time.
>
> I can't see what I might be overlooking.  There are no conflicts. I have
> tried a  different NIC as well.
>
> Dharam
>
>                   Visit our website regularly for FAQs,
>                articles, how-to's, tech tips and much more
>                   http://nospin.com - http://nospin.org
>

                Curious about the people moderating your
                   messages? Visit our staff web site:
                     http://nospin.com/pc/staff.html