----- Original Message -----
From: Richard T <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, August 28, 2000 11:50 PM
Subject: [PCBUILD] Can't get system to boot with IDE device!Helllp!


> Hi Listers.
>            Now, this is a strange situation which I've not encountered
> before, i'll try not to be too wordy with it.
>      The system is a Abit BX-6 with a P11 450, 256SDRAM Diamond Stealth
> Video, Soundblaster 128, IDE2=36Xcdrom, 2xMitsui(HiVal)cdr.IDE1= Maxtor
> 16meg H.D. zip100. 56kSoftware modem, win98 vers2
>  Here's what's going on:
>     Wishing to copy some files off of a laptop harddrive which I was
> planning on re-doing,I installed the adapter and I slaved that drive off
> of IDE 1, position 2, where the zip drive was. It worked just fine.I
> copied my files, turned off the machine and disconnected same and
> re-connected the zip.The Machine would not boot up...the Fans worked,
> but other than that, nothing at all! I then removed the cables from the
> zip and tried again.. it booted just fine. A little later, I decided to
> try to connect an extra Maxtor 6.5 H.D. that I had laying around, just
> to see if it would work. It didn't.. no boot at all, no nothing! once
> again I turned everything off and removed the drive and it booted. I
> proceeded to do my work, eventually, I just had to try to connect the
> zip one more time. Nothing worked again, except.. this time, when I
> tried to re-boot nothing at all happened, other than the fans running.
> It's still dark!
>     My gut is that there's a power supply issue here, but the power
> supply used is one which I put in only about 9 months ago. I do'nt have
> another one around to test it with, but before I go spinning my wheels,
> I thought i'd ask the smartest group of computer nuts in the
> world..Please, any thoughts or insight here??
> Thanks a million in advance!
> Richard Tabas
> Philly, Pa.

I had a similar problem with the Abit BE6-II and the Diamond StealthIII S540
not booting.  I replaced the Diamond Stealth with an ATI Rage Video and the
problem has not reoccurred.

Steve Beck
>
>                          PCBUILD's List Owner's:
>                       Bob Wright<[log in to unmask]>
>                        Drew Dunn<[log in to unmask]>

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>