Yui,
I have a Hi-Val LS-120 drive on my second channel as the slave drive to my
CD-ROM.  I works fine for both read and write.  AMI BIOS settings are:
Type:                   ARMD
LBA/Large Mode: Off
Block Mode:             Off
32 Bit Mode:    Off
PIO Mode:               Auto

Be sure that you have the master/slave jumper setting correct so that it
does not conflict with the other device on the channel (if there is one).
HTH,

Jerry Rasmussen
Rasmussen & Bucklin Associates
Coral Springs FL
[log in to unmask]
=======================================

-----Original Message-----
On Behalf Of Yui Shin

Hi, I'm not very familiar with the LS-120s', but I have installed a couple.
One thing I recalled was they had to be primary slave or they wouldn't
work correctly.............
Does your BIOS have a floppy emulation setting (ARMD) ? Big help
if you use it.

 8-) <[log in to unmask]>
wrote:
On the other hand, the LS-120 still isn't.  Windows finds it, reads from it,
> but cannot write to it as it still says the disk is full.???  there is
only
> one file on it approx 153k in size...
>
> Thanks again,
> David A. Abbe
> [log in to unmask]

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org