John,

Is the power cable hard wired (permanently connected) to the monitor?  If
not, then swap the cable with one for the PC and see if the problem moves
with the cable.  If the problem follows the cable, you can get a
replacement cable (one size fits all) for around $10US.  Otherwise.....

The inside of a monitor case is very similar to a television.  There are
residual electrical voltages (even hours after turning it off) that can
pick you up and toss you across the room --- or worse.

I suggest you call a couple TV repair shops and explain your problem.
More than likely you will find one that will fix the loose connection
fairly cheaply.  If not, then now may be the perfect time to upgrade to a
bigger monitor. <grin>

Jim Meagher
=====
Micro Solutions Consulting        Member of The HTML Writers Guild
http://www.ezy.net/~microsol     International Webmasters Association
410-543-8996                MS Site Builder Network - Level 2 member
=====
-----Original Message-----
From: John G. Cakars <[log in to unmask]>


>Packard Bell PB8515SV, BPCS 010201001
>
>If you
>jiggle the cord, you can hear a clicking noise, like that of
>the on off switch, trying to come on.
>

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]