My microstar AT board did not come with connectors for USB, but has the
connectors on the board.  I found the connectors I needed at Dalco
electronics.   http://www.dalco.com

Dan
----- Original Message -----
From: Jim Meagher <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 05, 1999 9:59 AM
Subject: Re: [PCBUILD] USB mothrbd connectors


> Bob,
>
> USB is more than just a plug.  If they didn't include the connectors, then
> they probably didn't include the other circuitry and software needed to
> "talk" to the USB port.
>
> Jim Meagher
> =====
> Micro Solutions Consulting        Member of The HTML Writers Guild
> http://www.ezy.net/~microsol     International Webmasters Association
> 410-543-8996                MS Site Builder Network - Level 2 member
> =====
> ----- Original Message -----
> From: bdecker <[log in to unmask]>
>
> > Looking for information on purchase of USB connectors for mounting on a
> > motherbd.  My Intel VS 440FX  has a mounting pad with traces to it
> marked as
> > USB connector, but no connectors were installed.
>
>             PCBUILD maintains many useful files for download
>               on our web site - visit our download page at:
>                      http://nospin.com/pc/files.html
>

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]