On Tue, 31 Jul 2001 06:55:03 +0000
 Julie Scorer <[log in to unmask]> wrote:
> Denis,
> I'm afraid I don't understand Cas or Density so would
> appreciate an explanation of these. The motherboard is a
> Rhino12 with 4 simm slots and one dimm. I had 4x4mb EDO
>and 1x32mb SDRam pc66 in it and all worked fine before.

Julie,

A simple answer to your problem. PC100 will not work in the
Rhino 12 board.  The Rhino board will work only with EDO or
FPM RAM.  PC100 is not EDO or FPM.  Your PC66 is probably
FPM.

I have the Rhino 12 board in one of my systems, and have the
manual which states that PC100 will not work. The speed is
not the problem, but the electronics on the memory board is
not compatable with the slot.

Maybe you can find someone who will swap memory with you.
Most boards now can work with the PC100 but not EDO and
someone may have some EDO or FPM memory left over from an
upgrade.

HTH,

Doug

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>