Hello and thank you all:

I finally did get this computer up and running.  Thanks Jun for the tip
on "Never do a ""Typical""
from the Sis530 setup, install the VGA driver only!!! "  That did it I
got the drivers installed and
after a reboot I had the proper drivers and it worked.  I ran all day
with no problems.
A special thanks to all who helped with this computer, Jun Qian, Steve
Wolfe, and Jim Hibbs.
I couldn't have done it without you and this group of people.

TTYL
Mark Wojtanowicz


<Well, nothing you can do except to try the newest driver from SiS
website.  If you are already trying the new driver, make sure that you do
it right.  SiS driver set can be only installed by running the setup.exe,
you can't do it in device manager. running the setup will take you to
some options,
remember, never ever click "Typical", it will destroy your good work (by
trying to install old DX file and other out-of-date stuff), always do a
"Customs" installation, never install any DirectX, or anyother media
related part, install the VGA driver only!!! Good luck.

Since your mobo has been shorted, there is possibility that it has been
damaged.

Jun Qian>

<> Hello All
>
> Thank you for the help.  At least now the power supply,
> lights,fans and hard drive power up.  You were right the
> MB must have been shorting someplace  I put small
> pieces of cardboard between the MB and case and then
> retried.  Now I get video, It has built in AGP graphics.
> But I can't load the drivers because when I do it gets
> jittery and about 7 of each item.  I can't see enough to
> make any changes, except in safe mode.  What do I change
> to get the AGP video working?>

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                    http://nospin.com/pc/pcbuild.html