You might try the Crucial site and see if they still have the system in
their database and can recommend some memory.

I think that the problem is that a lot of newer memory chips are high
density, which the older motherboards can't cope with.  So, you are looking
for a memory module with less capacity per chip and more of them installed
on the module.  Look for modules with eight chips on at least one side.  If
it has eight chips on both sides, this is probably even better.

You might even contact by email some of the other memory specialty venders,
like Mushkin and Memory Man, and see if they can tell you whether they have
something in stock that they think will work with your system.

John Sproule

----- Original Message -----
From: "Russ Cox" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 01, 2005 10:25 PM
Subject: [PCBUILD] memory recognized?


I'm trying to upgrade an old Gateway P5 133 with more memory. It just has
the original 16M, not enough to really run Win 98.  Gateway web site doesn't
recognize the S/n nor list that model. Their techs only spec SDRAM PC 100
(up to 64M) with no other specs. I tried several SDRAM sticks that won't
work. But a 64M NEC stick works, but only 16M is recognized. So I get a
total of 32M with the original RAM in place. Why doesn't the computer
recognize the whole 64M? What other specs do I need to get the correct
memory sticks?

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                          http://freepctech.com