Hello All,

I have also been trying to overclock a Cyrix PR200 which my motherboard
(a P5V580-B with 580VPX chipset) will let me use 2 x 75mhz or 2½ x
66mhz. The problem comes when I try to run it at 2½ x 75mhz, The system
reports it as a Cyrix PR233 and boots OK and works in DOS mode but
Windows (95) won't load. It just freezes at the splash screen. I have
tried re-installing W95 but same problem persists. 
By the way, I can't find a manual for my motherboard, which makes
changing jumper setting a real pain

Any suggestions ?

-----Original Message-----
From:   David Olds [SMTP:[log in to unmask]]

you cannot overclock Cyrix CPUS with any success...Also, they do not
allow
.5 settings...they are either 2x or 3x....

-----Original Message-----
From: Sami Al-Mohssen <[log in to unmask]>
Subject: [PCBUILD] Overclocking the Cyrix CPU


>When i change the multiplier jumper to 2.5 (the bus speed is fixed at
>75MHZ) to overclock the cpu to 187MHZ the computer runs at half the
speed
>it reports that it has cyrix PR 90. why is this happening? how can i
>overclock it then?

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]