PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Sat, 5 Aug 2000 22:55:23 +1000
Content-Type:
text/plain
Parts/Attachments:
text/plain (49 lines)
----- Original Message -----
From: "Edna Sloan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, August 03, 2000 6:07 PM
Subject: [PCBUILD] ATA66?


> How can one tell what HD mode is being used in a system?  I just installed
a
> WD 13G ata66 HD on a Soyo 7ILM/B 810 chipset board that supports ata66,
> using the 80 pin cable.  In the bios, I just left it on "auto" detect.  It
> works fine, but I'm not sure what mode its operating in.  At boot up the
> drive model# is shown along with other drives(CD), and later another full
> screen comes up that shows a list of all drives, their type, and below
this
> all IRQs being used by the system - on this screen, it says the drive is
> udma66(master on primary), and the CD drive is udma 33(on secondary
> controller).  Does this indicate how the drives are configured, or is it
> just Id'ing the types they are?  I really don't notice a difference in
speed
> as compared with the 2G udma 33 HD I replaced.   In the bios one can also
> select LBA, or LARGE,  as well as the AUTO.
>
> One other question: In Device Manager, I am getting a large yellow
question
> mark- Unknown Device, category and no drivers loaded for it.  I'm not sure
> what this is or how to find out(?)  This system only has a pci modem
> installed- video and sound being integrated.   Everything seems work OK
> though.  Thanks, Edna Sloan
>

You may not have 810 chipset driver installed. You should locate the driver
on Soyo mobo CD or download from Intel website.
If you want to know which mode is your harddisk work at, you should check
which ATA storage driver is installed in your computer. The default win98
busmaster driver is ATA-33, to use ATA-66 mode, you will need new driver
designed for your chipset, for 810 mobo, use the Intel driver from
www.intel.com (you should also find it on Soyo CD).

I recommand to use drivers from Intel website.


Jun Qian

               The NOSPIN Group Promotions is now offering
      special "Free-After-Rebate" Software specials in conjunction
          with Beyond.com.   We have new offers all the time!!!
                      http://nospin.com/promotions

ATOM RSS1 RSS2