the hd i am using is a Maxtor 6Y080P0

stephen r stanfield 

 

-------Original Message-------

 

From: David Gillett

Date: 09/21/05 00:59:59

To: [log in to unmask]

Subject: Re: [PCBUILD]

 

On 20 Sep 2005 at 9:05, srs wrote:

 

> Do i remove jumper?

>

> > From: joseph marty

> >

> > Take out the old drive, it is either already toast or soon will be.  Be
sure

> > to reset the jumper on the new drive as master solo rather than master
with

> > slave.

 

  Different manufacturers have different requirements.  On most of the

drives that I've worked with lately, "master with a slave on this channel"

and "only drive on this channel" have been the same jumper configuration.

But I know I have worked with drives in the past on which these were two

different jumper positions.

  If you don't see an "only drive on this channel" setting listed, then

leaving it on "master" should be fine.  If you're still not sure, please

post the exact make and model -- someone else here may have a similar drive

(or its manual) and be able to give a definite answer.

 

David Gillett

 

                  Visit our website regularly for FAQs,

               articles, how-to's, tech tips and much more

                          http://freepctech.com

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                          http://freepctech.com