Hi List Members,
I am having a strange problem with a customers machine.
I can't get it to boot from a boot floppy.  The machine is a
HP Vectra VL2 4/66.  The floppy drive is setup and enabled
correctly in the Cmos and the drives works just fine in Win 95.
I have tried several different boot disks with the same result.
I have replaced the drive and the drive cable.  The drive will
read and write in Windows and in a DOS window in windows.
I can run a Dos program from the floppy in a Dos window.  If
I boot to Dos and try to run the same program I get a
"Drive not ready message".  If I disable boot from the
harddrive in the Cmos the system asks for a boot disk then
hit any key.  At this time the drive light comes on for a moment
then goes out and that is it.
Any ideas would be appreciated and tried. :)
Best Regards,

Bill Griffith
Integrated Computer Solutions

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                        Drew Dunn<[log in to unmask]>