At 09:53 AM 3/27/99 -0600, you wrote:
>I have used Zip drives for years and have always used a PP external unit on
>my personal computer. Just recently, I had a left over internal IDE unit and
>installed it into my system. The unit worked and read all of my old ZIP disk
>up until I loaded the drivers that came with the unit. The internal ZIP is
>mfg by NEC but is still a 100MB unit. When I try to access a ZIP disk used
>by my old external zip drive, it states that the disk is not formatted. Once
>formatted, it works fine. The problem is that after the internal ZIP formats
>the disk, the External ZIP no longer is able to read the disk until it
>formats the disk again. So, I can't read or share information between the
>two.
>
>Again, I was initially able to read the old disk in the new internal unit
>untill the new intall software was installed. I have also tried to reinstall
>the old drivers with no luck. Has anyone had this problem and are you aware
>of a fix?
>
>Dennis Noble

Dennis,

Have you tried to get the latest and greatest drivers from Iomega or The
Unofficial Iomega Page at JUIP.COM ( http://www.juip.com )?

Jorge

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                    http://nospin.com/pc/pcbuild.html