At 08:18 AM 3/26/99 , Roberto Safora wrote:
>I am dealing with a mobo shuttle hot 661v31.(atx)
>
>I dont get to properly operate the front power button.
>Under certain conditions¿? the system starts, and under others it just light
>the power led and the hdd led, and remains that way with no response. The
>monitor doesnot get to show anything.
>Only when I manage the rear power bottom of the power supply the system
>returns to normal operation
>Any sugestion?
>The manual  reads this:
>
>"Dual Function Power Button -- The system can be one of two states, one is
>Suspend mode and the other is the Soft-off mode. Pushing the power button
>for less than 4 seconds will place the system into Suspend mode. When push
>the power button for more than 4 seconds, the system enters the Soft-off
>mode."

The problem will disappear if you go into your CMOS settings and into
the POWER MANAGEMENT area, there disable the 4 second delay
for shut down.   This is usually on the right hand side of the displayed
screen of options.   Just disable this option, even if you have the
power management turned off...  your problem will disappear.

                 Bob Wright
       The NOSPIN Group, Inc.
http://nospin.com - http://nospin.org

        PCBUILD only works if you contribute. Send your messages
             to be posted to: [log in to unmask]