My EPoX manual states "... supports standard Fast Page, EDO (Extended Data
Out or Hyper Page Mode), or synchronous DRAM...."  It also states that
DIMM socket 3 can not be used in conjuction with the two SIMM sockets.
There is a discussion about RAM speed, but there is no mention of voltages
and there is no jumper for RAM voltage, so I assume it just does what is
necessary.

The other two motherboard manuals have similar statements.

Jim Meagher
=====
Micro Solutions Consulting        Member of The HTML Writers Guild
http://www.ezy.net/~microsol     International Webmasters Association
410-543-8996                MS Site Builder Network - Level 2 member
=====
----- Original Message -----
From: Twin*.*Star <[log in to unmask]>

> Does it actually give the EDO 5 v and the SDRAM 3.3 v or are you just
> lucking you have not yet burned
>
> ----------
> From:   Jim Meagher[SMTP:[log in to unmask]]
> Sent:   Saturday, May 29, 1999 6:12 PM
>
> Based on my experiences, they can be used together on many boards.
> My Epox board allows both.  My son's FIC board allows both, and my
> daughters no-name 430VX chipset board allows both.
>
> But as Daniel says, there is no way of telling for sure without more
> detailed information about the motherboard in question.
>
>>----- Original Message -----
>>From: Twin*.*Star <[log in to unmask]>
>>
>> NO, NO, NO, NO, NO....
>>
>> Very few, I repeat, very few mobo allow installation of
>> SIMMs and DIMMs.
>>

            PCBUILD maintains many useful files for download
              on our web site - visit our download page at:
                     http://nospin.com/pc/files.html