Before you bring back the motherboard, unhook everything but ram and video
card & make sure the CPU is seated securely and the MB is not touching the
case anywhere.  I had the same problem once, turned out the MB was touching
the bottom of the case due to a missed spacer.

Dave Jones
http://www.vdoguy.com

Camel: A horse designed by committee


----- Original Message -----
From: "JERRY NICKERSON" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 25, 2003 12:57 AM
Subject: Re: [PCBUILD] POST: no beep(s) or post error msg on screen


> I tested the power supply with an ATX tester from PC Power & Cooling and
it
> checks out OK.
>
> The monitor displays a "NO SIGNAL" message.  I removed and reinstalled the
> graphics card
> and results were the same.
>
> Jerry
>

        The NOSPIN Group provides a monthly newsletter with great
       tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
           Visit our web site to signup: http://freepctech.com