Just a guess... Try taking the battery out for 12 hours or so(?)

Regards,
db

 -----Original Message-----
From:   PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]  On Behalf Of Sean Bossinger
Sent:   Tuesday, February 20, 2001 11:30 AM
To:     [log in to unmask]
Subject:        [PCBUILD] ASUS A7M266 with Athlon not POSTing

I have an ASUS A7M266 MOBO with Athlon 1.2GHz.  According to the manual (and
the website) the board should be set to run at 133MHz (as the multiplier is
9).  Now, I realize that the multiplier is 12.0, and at 100MhZ, this would
be a correct setting.

The problem is that I cannot get ANY display at POST.  I had formerly gotten
into the CMOS.

As this is the first PC I've ever built, I'm concerned that I've destroyed
my creation...

Someone please tell me that all I have to do is clear the CMOS and start
over...

PLEASE?   :-)

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>

               The NOSPIN Group Promotions is now offering
              Mandrake Linux or Red Hat Linux CD sets along
         with our NOSPIN Power Linux CD...  at a great price!!!
             http://freepctech.com/goodies/promotions.shtml