sorry about that
removing the NIC did not resolve the problem.  As for the settings, I have
been unable to set the card up because the computer won't boot up

Andy
-----Original Message-----
From: Earl Truss <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Monday, December 07, 1998 5:34 PM
Subject: Re: [PCBUILD] Floppy Drive Problem


>You've not mentioned if removing the NIC fixes the problem.  It would be
>helpful to know this.
>Also, what settings have you used for the NIC?
>----------
>> From: Andre Cotnoir <[log in to unmask]>
>> To: [log in to unmask]
>> Subject: [PCBUILD] Floppy Drive Problem
>> Date: Sunday, December 06, 1998 5:04 PM
>>
>> I have an old 486 DX2 66 that I wanted to connect in a peer to peer
>> home network.  It has 2 floppy drives (A-3 1/2 1.44 Meg and B-5 1/4 1.2
>> Meg).  After I installed an ISA D-Link NIC, the computer booted up and
>went
>> through the POST, checked drive A and stalled on drive B.  The light on
>the
>
>            PCBUILD maintains many useful files for download
>              on our web site - visit our download page at:
>                     http://nospin.com/pc/files.html
>

            PCBUILD maintains many useful files for download
              on our web site - visit our download page at:
                     http://nospin.com/pc/files.html