PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kenneth Alan Boyd Ramsay <[log in to unmask]>
Reply To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Fri, 2 Oct 1998 06:53:31 -0400
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (41 lines)
> ------------------------------
> I am moving a small network from office a to b and the manager wants the
> hub up in the attic of the new office.  As I usually stick them in a
> closet or cabinet or something I thought I had better ask, does anybody
> have any problems with the temperatures sometimes reached in attics??
> Will it be too hot for the hub up there??
>
> Right now it is just a Linksys Fast Ether 4 port but will be adding to it
> later on.  In the attic it would save lot's of distance on the cable
> runs.
>
> Thanks for any replies.
>
> David A.Abbe

Depending on the design and where the insulation is, you could expect
temperatures in excess of 120 F here at lat. 45 on a 70 F sunny afternoon
and as cold as your coldest nights.  Expect at least 50 F above your
hottest day in a typical house. If the office is an industrial
building that uses the space above the ceiling tiles as a plenum to
return air to the air conditioning, expect temperatures of 20 - 30 F
above the office temperature.

Think about servicing the hub while balancing atop a 10 foot ladder -
you should have good, safe, all-around access - like a mezzanine.

Consider a light-weight box with an air conditioning duct piped through it -
the ducts DO run through the attic, don't they?

Watch that you don't exceed cable temperatures by running them over
heating pipes or pot lights.

Boyd Ramsay

[log in to unmask]

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>


ATOM RSS1 RSS2