> This PC has three EIDE hard drives and a Mitsumi CD ROM on the primary and
> Secondary on board controllers.I also have a old SB16 sound card with a
> on-board CD Controller that I use for a Sanyo 4 speed CD ROM drive..works
> great. This was working fine in all operating systems however once I
> installed SERVER the new install does not see the CD drive. It sees and
has


At the very beginning of the NT install (the floppy disk portion) you are
asked if there are any other devices (SCSI, IDE or other) and then prompted
to insert the NT compatible driver disk.

It is my opinion that the Sanyo was overlooked by you or the operating
system at this point.  I'm not sure as to what kind of  "old SB-16
controller card" support for NT servers you are going to find, but having
downloaded all available drivers and having them ready for your next attempt
at the server install would be advisable.

If possible, you could also try to get the Sanyo on the last IDE channel you
have.

hope this helps.

gary r. tennesen
[log in to unmask]
[log in to unmask]

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org