The only way this will work is if the drives have a jumper to put the LED
directly on or you were using the on board controller and a add in tertiary
controller with a LED connector. The best and most direct approach is to
plug the LED onto the drive.

I have a couple of old Seagate ULTRA 33 drives that have this jumper
however a new Seagate Ultra 66 Barracuda does not have the jumper.

Mark Rode
The NOSPIN Group

>I have an ABIT BE6 II Mobo with 2, WD 20.5G HDDs installed. The case I use
>has 2 HDD LED lights in the front of it. The Mobo has only 1 connector on the
>board for the HDD LED. The drives are both WD205BA UDMA/66 drives. Western
>Digital tells me there is no place to connect an LED light directly to their
>drives. I would like to have both LEDs functional. Anybody have any ideas how
>to connect the 2nd drive so the 2nd LED can be used?
>TIA,
>Jay Merritt

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                     http://nospin.com/pc/files.html