> > If you move it to the second
> > channel, by itself, you must set it as MASTER.
>
>This is not the case. I used to believe this was true, however:
>I have
>--and have seen at my place of work--seen a single CD device set and
>happily operating as a slave all by itself on the secondary channel.

Well, it may be working but this is not the proper or
recommended way to configure it for maximum throughput and
reliability. It should be set as MASTER.

Joab

        The NOSPIN Group provides a monthly newsletter with great
       tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
           Visit our web site to signup: http://freepctech.com