Two things I might suggest are to check your ram and try another video card.
Also, make sure all of your pins on your monitor are there and not broken or
bent.
----- Original Message -----
From: "JERRY NICKERSON" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, May 24, 2003 10:57 PM
Subject: Re: [PCBUILD] POST: no beep(s) or post error msg on screen
> I tested the power supply with an ATX tester from PC Power & Cooling and
it
> checks out OK.
>
> The monitor displays a "NO SIGNAL" message. I removed and reinstalled the
> graphics card
> and results were the same.
>
> Jerry
>
> ----- Original Message -----
> From: "Jerry Nickerson" <[log in to unmask]>
> To: <[log in to unmask]>
> Cc: "Jerry Nickerson" <[log in to unmask]>
> Sent: Saturday, May 24, 2003 8:24 PM
> Subject: POST: no beep(s) or post error msg on screen
>
>
> > I am building a new system as we speak. I always do a bearbones setup
> with cpu, memory, kb, graphics card & mouse. On boot up I hear no beeps
nor
> do any POST error messages come on the screen. All the fans, including
the
> PS, work. The monitor show its adjustment screen, but nothing else.
> >
> > System setup:
> > ASUS P4B266 w/ onboard audio, USB 2.
> > 256MB DDR ECC memory from Crucial 2100
> > Gainward GeForce# Ti 200 w/ nvida chipset. 1.5volt AGP 4x
> > 275 watt PC Power and cooling ATX12 power supply (hooked to MB
correctly)
> > Operating System is not installed.
> > MB set to use ASUS JumperFree mode.
> > No hard drive
> > No floppy
> > No CD rom
> > No add in cards (execpting the AGP card)
> >
> > I verified all the jumper setting, twice, per the manual. Since
> >
> >
> > I didn't have
> > external speakers attached, I set the case speaker as the place I wanted
> > the ASUS POST Reporter to go to.
> >
> > All the manual says about this situation is: 'If you do not see anything
> within
> > 30 sec. from the time you turn on the power, the system may have failed
a
> power
> > on test'.
> >
> > I'm I wrong on doing a barebones system check? It has worked for me on
> the last
> > three systems. Should I install the CD Rom, HD & Floppy and see what
> happens.
> >
> > Thanks.
> > Jerry
> >
>
> The NOSPIN Group provides a monthly newsletter with great
> tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
> Visit our web site to signup: http://freepctech.com
>
>
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
