BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Dresser <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Wed, 5 Sep 2007 13:02:51 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (69 lines)
Colin,

Measuring speaker impedance with an Ohm meter doesn't give you an accurate 
reading because an ohm meter measures resistance, not impedance, which is a 
combination of resistance and reactance.

Steve

----- Original Message ----- 
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 05, 2007 12:53
Subject: Re: OT stereo question


> most home audio amplifiers are fine down to four ohms.
> If you can find the manual for your sherwood, it'll let you know what the
> minimum impedance load should be per channel.
> Its an interesting fact that speakers rated at 8 ohms often check out with
> an ohm meter at an ohm or two less then their rated impedance.
> Sometimes this is because while in operation, they are rated at 8ohms or
> show an 8ohm load to the amplifier, but when nothing is being sent into
> them, they are slightly less.
> Then you get crap speakers that are rated at 4 or 8 ohms, and show a 32 
> ohm
> impedance...I bought a 12 inch sub rated at 1000 watts from a liquidation
> depot and when i finally got my ohm meter and tested the impedance of the
> speaker, it showed 32 ohms....not terribly good for a 1000 watt car
> amplifier rated at 4 ohms.
> I guess that's what happens when you only pay 15 bucks for such an item.
> 73
> Colin, V A6BKX
> ----- Original Message ----- 
> From: "Robert Clark" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, September 04, 2007 8:19 PM
> Subject: OT stereo question
>
>
>>     Well I hope I did the right thing, ordered a Sherwood stereo 
>> receiver.
>> Quewastion I ahve is, I have 2 pairs of speakers which are 6 ohms. 
>> Should
> I
>> bother with them, get matching transformers, or look for 8 ohm speakers?
>>
>> *---*  *---*  *---*  *---*  *---*
>> Money can't buy you happiness. but it does bring you a more pleasant form
> of
>> misery.
>>  -- Spike Milligan
>> Robert & Dreamer Doll  ke7nwn
>> Newport, Oregon
>> N24C 3G 8/2000 Hookup
>> [log in to unmask]
>> http://webpages.charter.net/dog_guide/
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.485 / Virus Database: 269.13.5/988 - Release Date: 9/4/2007
> 9:14 AM
>>
>>
>
>
> 

ATOM RSS1 RSS2