From mods.dk:
Remove the top and bottom covers.

Look at the vertical p.c. board behind the front of the radio. There will be
2 small chip resistors on the left side of the board.

Carefully remove the one with the number 0. It will be the one closest to
the left near the grounding spring. You will probably have to scrape it off
with
a pair of needle nose pliers.

After you remove it the VFO ranges should be:
VHF TX 136.995 - 173.995. RX should be 118-174.
UHF TX should be 410-469.995 RX should be 300-470.

If you press the VFO button for 1 second on UHF you also have RX 800-1000
MHz.

OZ0TE Jacob
---- Original Message ----
On Sunday, June 05, 2005 6:46 AM [GMT+1=CET],
Gary Tillinghast <[log in to unmask]> wrote:

> Hi all Hambones.  Has anyone found any modifications to the Kenwood
> TMV7A radio?  Whether you can enhance the receive and transmit
> ranges?  Thanks Gary KB2YAA



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 04-06-2005