BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Brice Mijares <[log in to unmask]>
Reply To:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Date:
Wed, 17 Mar 2004 03:47:59 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (61 lines)
Also, We both have more than one computer sharing the router if that makes a
difference.
----- Original Message -----
From: "Matthew Elliff" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 16, 2004 9:36 PM
Subject: Re: brice and his linksys with echolink


> well i do know that we have the same configuration page so i assume yes,
but
> i didn't know you could do it, and don't know how to do it.
> ----- Original Message -----
> From: "Gary Jackson" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, March 16, 2004 11:07 PM
> Subject: Re: brice and his linksys with echolink
>
>
> > Mathew,
> >
> > any chance you and he have the same model router? I asked this earlier.
I
> > have a d-link and the settings can be saved in the d-link and sent to
> > another user that can be imported if it's the same  model.
> >
> > Gary
> >
> >
> > ----- Original Message -----
> > From: "Matthew Elliff" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Tuesday, March 16, 2004 10:26 PM
> > Subject: brice and his linksys with echolink
> >
> >
> > hi all. i've tried to help brice figure out his linksys router. here's
> what
> > is going on. i guide him through how to foward ports, but when we aply
the
> > changes by putting 5198 in the first box for the port range, and 52199
in
> > the second one. then i tell him to check the udp check box. all fine
here.
> i
> > also helop him tell him what number computer he has so te router will
send
> > the port to the right machine. then i tell him to enable the port by
> > checking the box. but when he aplies the changes, each time, the first
> port
> > is 5199 and the second is 51980. i even told him to make sure the 0 is
> > unchecked. both of us were using window-eyes 4.5 under windows xp. i
> forward
> > the ports all the time here and nothing like what i just discribed above
> > happens to me. any ideas? trying to get him on echolink but we can't get
> > that far along unfortunatly. if i need to clarify something let me know.
> > 73
> > Matthew Elliff KC0QJJ
> >
>

ATOM RSS1 RSS2