same error for me but the file name is different, it's vsprint7.ocx. See if
that site's legacy tool helps you though. It very well may.
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, October 09, 2010 4:21 PM
Subject: Re: ICT90A programming software?
> THanks. I looked at that page and didn't see a reference to the file I
> ned. My program says runtime error 339 comctrl32.ocx or one of its
> dependencies is missing. Am I missing something obvious, or are you
> guys getting a different error?
> 73
> Butch Bussen
> wa0vjr
> open Node 3148
> Las Vegas
>
>
> On Sat, 9 Oct 2010, John Miller wrote:
>
>> I found the fix, you have to replace the VSPRINT.OCX file, and one other,
>> found together on the website I'll post at the end of this message, once
>> you
>> download these 2 files, put them in your c:\windows\system32 folder, or
>> equivelent, as specified by the instructions on the web site, I just did
>> this myself and the program works fine now. The site is:
>> http://www.legacyfamilytree.com/helpDLL-OCXerrors.asp
>> ----- Original Message -----
>> From: "colin McDonald" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, October 09, 2010 2:40 AM
>> Subject: Re: ICT90A programming software?
>>
>>
>>> i've got hundreds.
>>> no idea which one to even look at...you have to look up each individual
>>> update up on the microsoft website, and even then, it doesn't always
>>> clearly
>>> tell you the date it was issued.
>>> frustrating.
>>> I did a google on the runtime 339 error, and all I found was
>>> recommendations
>>> for reg cleaners that you have to pay for that will solve all your
>>> computer
>>> ails, and even pour you a tall glass of your favorite beer while your
>>> waiting for the regb clean to finish.
>>> no doubt they'll also cook dinner, do the laundry and other adult
>>> related
>>> tasks at the same time.
>>> anyway, john, if you can find or remember something about the update you
>>> removed, if not the number, than perhaps what it was for or what
>>> particular
>>> issue it addressed?
>>> I don't really want to try and do a system restore to over a year ago.
>>> probably don't even have a restore point set for that far back.
>>> I can still program the radio easily enough, but the programming
>>> software
>>> is
>>> nice to use if one has it.
>>> BTW, the OPC478 icom programming cable doesn't happen to work with the
>>> th
>>> F6A does it?
>>> 73
>>> Colin, V A6BKX
>>> ----- Original Message -----
>>> From: "Butch Bussen" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, October 08, 2010 11:15 PM
>>> Subject: Re: ICT90A programming software?
>>>
>>>
>>>> If you find out what update to uninstall, let me know.
>>>> THanks.
>>>> 73
>>>> Butch Bussen
>>>> wa0vjr
>>>> open Node 3148
>>>> Las Vegas
>>>>
>>>>
>>>> On Fri, 8 Oct
>>>> 2010, colin McDonald wrote:
>>>>
>>>>> hmmm, i'll give that a shot...hopefully I can uninstall the particular
>>>>> update without compremising all the subsequent updates.
>>>>> It's odd Icom or someone hasn't written an update patch for that
>>>>> software...guess since the IC T90 is no longer in production, they
>>>>> could
>>>>> care less.
>>>>> i'm happy I got the HT working again though, I've missed that little
>>>>> guy.
>>>>> 73
>>>>> Colin, V A6BKX
>>>>> ----- Original Message -----
>>>>> From: "John Miller" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Friday, October 08, 2010 12:29 PM
>>>>> Subject: Re: ICT90A programming software?
>>>>>
>>>>>
>>>>>> that's caused by a windows update, it happened to all my computers aw
>>>>>> well.
>>>>>> ----- Original Message -----
>>>>>> From: "colin McDonald" <[log in to unmask]>
>>>>>> To: <[log in to unmask]>
>>>>>> Sent: Friday, October 08, 2010 1:39 PM
>>>>>> Subject: ICT90A programming software?
>>>>>>
>>>>>>
>>>>>>> Hey All:
>>>>>>> well, I got my IC T90A up and running again...had to pull out the
>>>>>>> little
>>>>>>> circuit board that is for over charge protection and voltage
>>>>>>> regulation
>>>>>>> out
>>>>>>> of the battery case, and all is well now...at least it works until I
>>>>>>> can
>>>>>>> get
>>>>>>> a new battery.
>>>>>>> So, i went to reprogram my IC T90A using the cst90a software and
>>>>>>> OPC478
>>>>>>> cable I got with the radio originally, and at some point in the last
>>>>>>> year
>>>>>>> and a half, the programming software on the computer has become
>>>>>>> corrupted.
>>>>>>> When I try to open the CST90 software, i get a "Run-time error 339,
>>>>>>> VSPRINT7.OCX" is invalid or the file is missing.
>>>>>>> Not sure how this happened as I haven't removed anything to do with
>>>>>>> the
>>>>>>> programming software.
>>>>>>> It was working last time I used it like I said, about a year and
>>>>>>> ahalf
>>>>>>> ago.
>>>>>>> So, I did a google search to see if I could redownload the software,
>>>>>>> but
>>>>>>> apparently it's only availible on CD from ICom or at least, from one
>>>>>>> of
>>>>>>> icoms dealers.
>>>>>>> So, I have a registered copy of the software, the right cable, but I
>>>>>>> can't
>>>>>>> program the radio.
>>>>>>> I don't know where my original programming cd is after 3 moves, and
>>>>>>> I
>>>>>>> highly
>>>>>>> doubt I can just call and ask for another copy as I probably didn't
>>>>>>> bother
>>>>>>> to register the thing originally.
>>>>>>> So, i'm wondering if anyone has the cst90 software that they can zip
>>>>>>> up
>>>>>>> and
>>>>>>> send me so I can see if i can get this thing going again.
>>>>>>> I can always reprogram manually, not a huge deal, but I would like
>>>>>>> to
>>>>>>> use
>>>>>>> the software as I have the right cable etc.
>>>>>>> it's already been perchased for my use, so I'm not requesting to
>>>>>>> pirate
>>>>>>> the
>>>>>>> software, I just need a uncorrupted version is all.
>>>>>>> 73
>>>>>>> Colin, V A6BKX
>>>>>
>>>>>
>>
>>
|
