OK, sounds good. Cliff will set you right, he's a great guy. I've never 
actually sent a radio to him for repair, but there was one time I wanted to 
do a trade with someone for something and he was the one who hooked me up 
with the person who had what I wanted, so he had us both go through him so 
he could make sure both items in the trade were as advertised and as they 
should be since he hooked us up. He didn't even charge us. It's rare I have 
problems with my radios but when the day comes I do, as long as he's still 
doing it, though it's not close to me by any means, he's the first place on 
my list I'd call.
----- Original Message ----- 
From: "Gary Smith" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, January 09, 2011 11:43 PM
Subject: Re: Kenwood Repair


> Hi John,
> That was one of the first things I checked.  Myself and a sighted friend
> checked every thing that we could think of.  So, thanks to Tom's
> information, I'm going to send it to Cliff Holland to see if he can find 
> the
> problem.
>
> 73, Gary, N5GD
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of John Miller
> Sent: Sunday, January 09, 2011 8:02 PM
> To: [log in to unmask]
> Subject: Re: Kenwood Repair
>
> you're not set for the receive antenna I take it? I'd make very sure 
> you're
> hooked to the right antenna jack, switch it over, or hit the function 
> button
>
> and the antenna tuner button and it will switch the HF jacks.
> ----- Original Message ----- 
> From: "Steve Forst" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, January 09, 2011 2:37 PM
> Subject: Re: Kenwood Repair
>
>
>> Gary,
>>
>> Are you sure that you are on the correct antenna jack?  I forget the
>> command to switch between antenna 1 and 2, but try moving the antenna to
>> the other HF jack.
>>
>> Steve KW3A
>>
>> On 1/9/2011 2:28 PM, Gary Smith wrote:
>>> I seem to be having some problems with the receiver on the TS2000.  I
>>> basically can't hear anything.  I thought maybe I had pressed some type
>>> of
>>> filter or another button that caused the problem.  I did a full factory
>>> reset but it didn't fix the problem.  I know it's not the antenna 
>>> because
>
>>> I
>>> have another radio hooked up and it works fine.
>>> So any suggestions on where the best Kenwood Service Center is or anyone
>>> else that could repair the radio?
>>>
>>> 73, Gary, N5GD
>>>
>>>
>>
>