Tom,

That first line:
00 - 87

means that if you assign  any number between 00 and 87 to a pf key, when 
you hit the pf key that particular menu will open.  Suppose for some 
reason you had to always mess around with the side tone volume,: you 
would set a pf key to 04 and anytime you hit the pf key menu 04 (side 
tone volume) would open.

   Not likely  you will set a key to  open a menu, but it is there if 
needed.

73, Steve KW3A



On 1/31/2013 7:01 AM, Tom Behler wrote:
> Steve:
>
> This is much better. .. Thanks much!
>
> I do have one question, though.
>
> What's the reference to menu 87 about at the very beginning?  The PF1
> and PF2 key functions are assigned to menus 79 and 80, and I thought
> menu 87 had something to do with the power on screen display.
>
> Tom Behler: KB8TYJ
>
> ----- Original Message ----- From: "Steve Forst" <[log in to unmask]> To:
> <[log in to unmask]> Sent: Wednesday, January 30, 2013
> 9:48 PM Subject: Re: Need help with TS590 front panel PF key function
> list for menus 79 and 80
>
>
>> Hope this is a little better.
>>
>> 73, Steve KW3A
>>
>> Assign one of the following functions to each PF key. Selecting
>> "OFF" assigns no function to the PF key.
>>
>> No. Function Remark
>>
>> 00-87 Menu No. 00-87 100 RX ANT 101 ANT1/2 102 VOX LEVEL 103 PROC
>> LEVEL 104 AT/TUNE Possible press and hold 105 CAR 106 TX-MONI 107
>> KEY DELAY 108 DRV 109 REV 110 FM-N 111 F.LOCK 112 NB LEV 113 NR
>> LEV 114 AUTO NOTCH 115 NOTCH WIDE 116 CH1 Possible press and hold
>> 117 CH2 Possible press and hold 118 CH3 Possible press and hold 119
>> CH4 Possible press and hold 120 RX Possible press and hold 121 A=B
>> 122 AGC SEL 123 TONE SEL 124 AGC OFF 125 Q-MR 126 Q-M.IN 127 DRV
>> 128 SPLIT Mic [PF2] default 129 TF-SET 130 A/B Mic [PF1] default
>> 131 SCAN Possible press and hold 132 M>V Mic [PF3] default 133
>> M.IN 134 CW T. 200 VOICE1 [PF A] default 201 VOICE2 [PF B] default
>> 202 VOICE3 The lower meter when transmitting 203 MONITOR Mic [PF4]
>> default 204 TX TUNE 205 DATA SEND The input voice from the data
>> terminal is transmitted 206 DOWN Mic [UP] default 207 UP Mic
>> [DWN]default 208 EMERGENCY Emergency frequency call (K type only)
>> OFF No function
>>
>
>
>