BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
Date:
Tue, 24 Feb 2009 11:02:04 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (47 lines)
That's approximately the technique I use on the FT-950 also.  The 950 has a nice feature called TXW which allows you to push a button while in receive mode to listen to your transmit frequency and adjust it if necessary.  You can't transmit while holding down that button, and it it reverts to normal split operation when you release it.  With so many buttons on the front panel of the 950, I put Dymo tape with single braille characters or dots on strategic buttons and on the VFO B and Select knobs.  

Last weekend I didn't use Split, but made 697 QSO's and 204 multipliers in the ARRL DX contest.  Lots of fun.


-----Original Message-----
>From: Steve Forst <[log in to unmask]>
>Sent: Feb 24, 2009 9:54 AM
>To: [log in to unmask]
>Subject: Re: splits
>
>Howard,
>
>Not sure what rig you are using, but here is what I do on the TS-2000:
>
>Say the DX is on 14.001 and listening up 1.  Tune to 14.001 and hit the A=B 
>button, this  puts both VFO's on the same frequency and mode.  Tune up the 
>band to 14.002.   Now one VFO is on his TX and the other is on his RX 
>frequency.   Hit the split button to put you into split operation and hit 
>A/B to reverse the VFO's.   Now  your RX freq is  back on the first VFO  of 
>14.001  and your TX VFO is on his RX freq of 14.002.
>
>The fact that you can't key in split makes me wonder if you are not getting 
>both VFO's into CW mode.   Hitting the A=B button will ensure that both 
>VFO's start on the same mode and freq.  Worked K5D 8 times last week, so it 
>works well for me here.
>
>73, Steve KW3A.
>
>
>----- Original Message ----- 
>From: "Howard Kaufman" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Tuesday, February 24, 2009 9:20 AM
>Subject: splits
>
>
>>I can't figure out how to transmit cw with the vfo split frequency.  Either
>> I get no keying output, or the vfo jumps to aggree with the last vfo set
>> frequency.  Anybody figured this one out?  I guess you can transfer a 
>> split
>> to a memory, but that is clumsy when chasing dx, and you hear "up" which
>> means transmit 1 kc up.
>> H T Kaufman MSW LCSW
>> Adaptive Technology Instructor
>> 

ATOM RSS1 RSS2