Is the control box for the rotor accessible?
What hex beam are you using.
Sounds like it is a nice setup.

73 N2DYN Angelo

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Lowell Miller
Sent: Tuesday, September 22, 2015 10:35 AM
To: [log in to unmask]
Subject: Re: Hex beam and what rotor?

Hello Brian,
I just put up a hex beam on a 35 foot mast.
I am using a Yaesu 450 rotor with the mast setting on the rotor mounted at
ground level. I have a bearring at the top of the house to allow the mast to
turn.  The bearing came from yeasu as well.  This cuts down the wind
resistance and weight at the top.  This is working very well for me.
Give it a try!
Best 73.
Lowell  W8QIY
----- Original Message -----
From: "Brian Horst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, September 21, 2015 10:17 AM
Subject: Hex beam and what rotor?


> Hi,
>
> I want to buy a hex beam but am unsure of what rotor to use.  I want 
> to mast mount the rotor and am open to suggestions of what to use>for 
> the rotor?
>
> Some have said the Alliance U-100 would work but then others say "not" 
> any suggestions from those using a similar set up?
>
> Brian, [log in to unmask]