Perfect instructions, Steve. Thanks so much. I'll let you know how things go
tomorrow or, more appropriately, today.

73's

Jerry


----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, October 22, 2004 11:18 PM
Subject: Re: tnc and pc input for the t h - f6a


> Hi Jerry,
>
> Yes, it is a menu function (menu 9).  When accessing the menus, make sure
> the radio is in VFO mode.  If you don't, some menus will be unavailable,
> and you won't know which ones and you'll lose count.  Once you get into
> Menu 9, rotate the tuning knob two clicks clockwise from the default (low
> beep) which is Speaker/Mic.  The functions in clockwise order are:
> Speaker/Mic, TNC, and PC.  You'll know if things are working correctly if
> you try to read data from the radio.  If they aren't, you'll get an error
> message that says the radio timed out.  Have fun.
>
> Steve
>
> On Friday 10/22/04 22:55 Jerry Neufeld wrote:
>
> >Good evening folks.
> >
> >Steve, Dave or anyone else who has used the Kenwood software with the t
h -
> >f6a, how do you get to the menu that changes the mic and headphone jacks
to
> >pc inputs to allow communication between the computer and the tranceiver,
at
> >least, from what I could see, it is a matter of a menu change.
> >
> >Thanks.
> >
> >Jerry