Dave,

Congrats on the new rig, you will love it.  While I don't use either one 
of these software packages, I know most are looking for 9600 baud which 
is the default for the serial connection.    If you are going to use the 
USB connection, try  setting everything to 9600: menu 62 in the 
radio(which is usb port speed), also your loggers and the Kenwood 
control program.  Everything will be happy at 9600.

Something you may not know is that you can have 2 programs connected at 
the same time, one on the usb and another on the serial port.  They can 
both work at the same time without conflict.  Maybe a logger on one port 
and control program on the other.    I rarely do this, but it can be done.

73, Steve  KW3A

   .


On 10/21/2013 5:14 PM, David Simpson wrote:
> Hi.
> 	I just bought a TS590 and got it set up, yesterday. I love it, and
> it's so easy to learn.
>
> I've installed the USB driver for the TS590 and the Kenwood command program.
> I've got the program working, but the default baud rate it wants is 115,200.
> I don't see that option in N1MM or ACLog. Do I need to change it to a lower
> value, somewhere in the TS590 menus, if I want it to work with those
> programs? If there is some accessible docs or mp3's that lay out or
> demonstrate what I need to know, can somebody point me to it? Am I right to
> assume that the other connection protocol values are N, 8, 1 for parity,
> data bits, and stop bits, respectively? I appreciate any help I can get; I'm
> trying to get set up for this weekend's CQWW test.
>
> Thanks and 73,
>
> Dave  W I 3 Y
>
>
>