LDG has the manual on their site and it gives a good description, I have one 
here in fact, it's a nice thing.
----- Original Message ----- 
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, October 19, 2010 8:44 PM
Subject: Re: LDG break out box


> Steve,
>
> You might still smell smoke, depending on what pins you play with.  Be
> careful not to use more than one cable at a time, as some of those cables
> share connections.  I thought I had a manual around here for that breakout
> box, but I'm not finding it.  Maybe I saw it on the LG site, or on W4RT's
> site.
>
> Steve
>
> ----- Original Message ----- 
> From: "Steve Forst" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, October 19, 2010 19:13
> Subject: Re: LDG break out box
>
>
>> Tnx Steve.   That's kind of what I figured, and it would seem to be
>> obvious, but  I'd rather ask first instead of asking later  "What's that
>> smoke I smell"?
>>
>> Tnx again, Steve KW3A
>>
>> On 10/19/2010 7:03 PM, Steve Dresser wrote:
>>> Steve,
>>>
>>> Top row goes from pin 1 on the left to 7 on the right.  Bottom row 
>>> starts
>>> with pin 8 on the left and ends with 14 on the right.  The actual
>>> function
>>> of each jack is, of course, determined by the pin-out of the device
>>> you're
>>> connected to.
>>>
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "Steve Forst"<[log in to unmask]>
>>> To:<[log in to unmask]>
>>> Sent: Tuesday, October 19, 2010 18:47
>>> Subject: LDG break out box
>>>
>>>
>>>> Just picked up one of the LDG break-out boxes (RCA-14), which  has DIN
>>>> jacks on the front, and turns them into RCA jacks coming out the rear.
>>>> Anyone know the numbering sequence of the rca jacks on the rear?
>>>>
>>>>
>>>> Tnx, Steve KW3A
>>>>
>>