Hi.
If you suggest it to MFJ, they'll probably build it and only one of the
four functions will actually work!
73, de Lou K2LKK
At 11:07 PM 5/15/2007 -0400, you wrote:
>Anthony,
>
>That would take up a lot of space on a desk mic, but it might work well in a
>box with the PF keys.
>
>Steve
>
>----- Original Message -----
>From: "Anthony Vece" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Tuesday, May 15, 2007 22:21
>Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>
>
> >I would also like to see a desk mic with a touchtone pad on it.
> >
> > 73 De Anthony W2AJV
> > [log in to unmask]
> > ECHOLINK NODE NUMBER: 74389
> >
> > ----- Original Message -----=20
> > From: Steve Dresser=20
> > To: [log in to unmask]
> > Sent: Tuesday, May 15, 2007 7:59 PM
> > Subject: Re: [BLIND-HAMS] Mc60 mc80 mc85 ...was...RE: changing mike =
> > gain on tmv7a
> >
> >
> > Brett,
> >
> > According to a friend of mine who got his information from a Kenwood=20
> > technician, you address the PF functions by grounding either pin 3 or =
> > 4=20
> > through a resistor. Depending on the value of the resistor, you =
> > address one=20
> > of two PF keys. I've thought about building a box with four buttons, =
> > one=20
> > for each PF key, but I'm a bit chicken about soldering an RJ45 =
> > connector.=20
> > It's too bad none of the Kenwood desk mics have those functions, or =
> > that=20
> > somebody hasn't come up with a box similar to what I've described.
> >
> > Steve
> >
> > ----- Original Message -----=20
> > From: "Brett Winches" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Tuesday, May 15, 2007 13:11
> > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
> >
> >
> > > You are right that capability would be wonderful. I wonder if you =
> > could
> > > add this if any of the wires in the cable are unused or otherwise
> > > available? Has anyone looked at the schematic to see how the PF
> > > function is done? =3D20
> > > =3D20
> > >
> > >
> > >
> > > -----
> > > BRETT WINCHESTER
> > > [log in to unmask]
> > > 208-639-8386
> > > ###
> > >
> > >
> > > -----Original Message-----
> > > From: For blind ham radio operators
> > > [mailto:[log in to unmask]] On Behalf Of Steve Dresser
> > > Sent: Tuesday, May 15, 2007 10:00 AM
> > > To: [log in to unmask]
> > > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
> > >
> > > Brett,
> > >
> > > "PF" stands for "programmable function." Many of the Kenwood hand =
> > mics
> > > have PF keys which can be used to control functions such as the =
> > speech,
> > > or the Enter key, etc. They're usually controlled by items =
> > somewhere in
> > > the menu, and are radio-specific.
> > >
> > > Steve
> > >
> > > ----- Original Message -----
> > > From: "Brett Winches" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Tuesday, May 15, 2007 09:51
> > > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
> > >
> > >
> > >> Dumb question here Steve, What is a PF key? =3D3D20
> > >>
> > >>
> > >>
> > >> -----
> > >> BRETT WINCHESTER
> > >> [log in to unmask]
> > >> 208-639-8386
> > >> ###
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: For blind ham radio operators
> > >> [mailto:[log in to unmask]] On Behalf Of Steve Dresser
> > >> Sent: Monday, May 14, 2007 8:48 PM
> > >> To: [log in to unmask]
> > >> Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on =
> > tmv7a
> > >>
> > >> Yes they do have up/down buttons. They do not have PF keys, which =
> > is
> > >> too bad because I'd like to define some of them as I would on a =
> > hand
> > >> mic.
> > >>
> > >> Steve
> > >>
> > >>
> > >>
> > >
> > >
> > >
> >
> >
> >
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.7.5/812 - Release Date: 5/19/2007
>1:52 PM
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5753
|