Where do I put my DMR id 

73 Dustin KF5VXR


> On Nov 12, 2015, at 4:03 AM, Barry <[log in to unmask]> wrote:
> 
> Hi Dustin,
> It can be done, but I'm not good at explaining.
> 
> You get into your zones list in the same way you get into your channels
> list. First of all you have to make sure you're in the particular zone that
> you want. Let's imagine you have several zones on your radio, and you've
> decided to call your local zone something imaginative like "Local". Once
> you've selected that zone, you will see a series of buttons. Most are
> unlabelled, but there are two called "add" and two called "delete". In
> between these sets of buttons you will find two list boxes, which are the
> key for this exersise. From left to right as you tab, the first one is
> called "available channels". This includes a list of all of your programmed
> channels. The next box is called "group members". This contains all of your
> programmed channels which have been added to the zone already. What you will
> notice is that when a channel is added to the "group members" box, it
> disappears from the "available channels" box.
> 
> So let's add a channel to your zone. First you have to find it in the
> Available Channels list. Once you do, hit the Shift+tab key combination
> until JAWS says "add". Press Enter on that button, and your channel will
> disappear from the available box and be added to the Group Members Box.  Now
> save, and your done.
> 
> If I've made that sound complicated, if you want me to have a go at doing it
> for you, please e-mail me your codeplug and instructions about which
> channels you want added to which zones.
> 
> My address is [log in to unmask]
> 
> Cheers,
> Barry VK6SP.
> 
> 
> 
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Dustin Thompson
> Sent: Monday, 9 November 2015 7:32 AM
> To: [log in to unmask]
> Subject: Md380 repost
> 
> OK guys, hopefully this got rid of all the =
> 
> 73 Dustin KF5VXR