Steve,
Come to think of it, I just figured it out by looking for the jack that
corresponded with a known pin on my TS-2000. There are some fixed audio
outputs, and I just used a pair of headphones to find them. Headphones are
great for finding low-voltage outputs.
Steve
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, October 19, 2010 20:58
Subject: Re: LDG break out box
> No problem Steve. I did read the manual some time ago at LDG's site,
> and I'll get a copy there. I didn't remember the manual being specific
> as to the numbering of the RCA jacks. What made me question it a bit
> was the way they are staggered in pairs. All seems well. The main
> thing I want to do with it is to break out the FSK pin on the 480, which
> is on the same connector as the amp.
>
> 73, Steve KW3A
>
> On 10/19/2010 8:44 PM, Steve Dresser wrote:
>> Steve,
>>
>> You might still smell smoke, depending on what pins you play with. Be
>> careful not to use more than one cable at a time, as some of those cables
>> share connections. I thought I had a manual around here for that
>> breakout
>> box, but I'm not finding it. Maybe I saw it on the LG site, or on W4RT's
>> site.
>>
>> Steve
>>
>> ----- Original Message -----
>> From: "Steve Forst"<[log in to unmask]>
>> To:<[log in to unmask]>
>> Sent: Tuesday, October 19, 2010 19:13
>> Subject: Re: LDG break out box
>>
>>
>>> Tnx Steve. That's kind of what I figured, and it would seem to be
>>> obvious, but I'd rather ask first instead of asking later "What's that
>>> smoke I smell"?
>>>
>>> Tnx again, Steve KW3A
>>>
>>> On 10/19/2010 7:03 PM, Steve Dresser wrote:
>>>> Steve,
>>>>
>>>> Top row goes from pin 1 on the left to 7 on the right. Bottom row
>>>> starts
>>>> with pin 8 on the left and ends with 14 on the right. The actual
>>>> function
>>>> of each jack is, of course, determined by the pin-out of the device
>>>> you're
>>>> connected to.
>>>>
>>>> Steve
>>>>
>>>> ----- Original Message -----
>>>> From: "Steve Forst"<[log in to unmask]>
>>>> To:<[log in to unmask]>
>>>> Sent: Tuesday, October 19, 2010 18:47
>>>> Subject: LDG break out box
>>>>
>>>>
>>>>> Just picked up one of the LDG break-out boxes (RCA-14), which has DIN
>>>>> jacks on the front, and turns them into RCA jacks coming out the rear.
>>>>> Anyone know the numbering sequence of the rca jacks on the rear?
>>>>>
>>>>>
>>>>> Tnx, Steve KW3A
>>>>>
>>>
>
|
