Are you not transmitting the right tone for the repeater? Are you home? If
so which repeater is it? I may be able to help, were not far from each other
and the closest repeaters to you at home I'm very familiar with.
John N1UMJ
----- Original Message -----
From: "Ashley Bernard" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 23, 2014 4:14 PM
Subject: Re: puxing 973 ht not receiving audio
> The radios do hear each other. The problem is that when I let go of the =
> PTT button on the Puxing I get no courtesy tone or sound of the repeater =
> dropping, when in reality the transmission went through perfectly fine =
> as I heard it 100 percent on my other radio.
> 73.
> Ashley KC1CPS
>> On Dec 23, 2014, at 4:11 PM, Colin McDonald <[log in to unmask]> =
> wrote:
>>=20
>> OK.
>> SO can you hear your puxing transmitting, with your kenwood, on the =
> repeater=20
>> input?
>> And vice versa? can you hear the kenwood transmitting on the repeater =
> input=20
>> with the puxing?
>> Meaning only on the input frequency, not through the repeater.
>> Perhaps do this test on a simplex frequency to find out if the radios =
> hear=20
>> each other.
>> You can trouble shoot these problems by eliminating one thing after =
> another.
>> Any technical problem solving/trouble shooting must be done in a =
> liniar=20
>> fashion to remove each potential issue one at a time until you find =
> the=20
>> problem.
>>=20
>> 73
>> Colin, V A6BKX
>> -----Original Message-----=20
>> From: Ashley Bernard
>> Sent: Tuesday, December 23, 2014 2:02 PM
>> To: [log in to unmask]
>> Subject: Re: puxing 973 ht not receiving audio
>>=20
>> yeah. it=3DE2=3D80=3D99s my radio. My kenwood is operating on the same =
> =3D
>> repeater just fine.
>>=20
>>> On Dec 23, 2014, at 4:01 PM, Colin McDonald <[log in to unmask]> =
> =3D
>> wrote:
>>> =3D20
>>> Ashley, is this on all repeater frequencies? or just one? could the =
> =3D
>> machine=3D20
>>> be down or temperarily off the air for maintenance?
>>> It does happen.
>>> Do you have another radio to test your receive and transmit?
>>> =3D20
>>> 73
>>> Colin, V A6BKX
>>> =3D20
>>> -----Original Message-----=3D20
>>> From: Ashley Bernard
>>> Sent: Tuesday, December 23, 2014 1:36 PM
>>> To: [log in to unmask]
>>> Subject: Re: puxing 973 ht not receiving audio
>>> =3D20
>>> now I=3D3DE2=3D3D80=3D3D99ve reset, and am back to my original =
> problem of =3D
>> not being =3D3D
>>> able to hear anything once I transmit. I=3D3DE2=3D3D80=3D3D99m =
> definitely =3D3D
>>> transmitting now, just not being notified. I=3D3DE2=3D3D80=3D3D99ve =
> tried =3D
>> turning =3D3D
>>> off what you instructed to turn off but still haven=3D3DE2=3D3D80=3D3D9=
> 9t =3D
>> solved the =3D3D
>>> issue yet.
>>> =3D20
>>>> On Dec 23, 2014, at 3:28 PM, Buddy Brannan <[log in to unmask]> =3D
>> wrote:
>>>> =3D3D20
>>>> That sounds like you maybe are transmitting but changed your offset =
> =3D
>> =3D3D3D
>>>> amount or direction.
>>>> =3D3D20
>>>> If you want to do a full reset, hold down menu while turning the =3D
>> radio =3D3D
>>> =3D3D3D
>>>> on. Wait a second after the beep, and then let go. Press confirm =3D3D=
>
>>> twice. =3D3D3D
>>>> That should reset everything but keep your memory channels =3D
>> intact.=3D3D3D20
>>>> =3D3D20
>>>> =3D3D3DE2=3D3D3D80=3D3D3D94=3D3D3D20
>>>> Buddy Brannan, KB5ELV - Erie, PA
>>>> Phone: 814-860-3194=3D3D3D20
>>>> Mobile: 814-431-0962
>>>> Email: [log in to unmask]
>>>> =3D3D20
>>>> =3D3D20
>>>> =3D3D20
>>>>> On Dec 23, 2014, at 3:25 PM, Ashley Bernard <[log in to unmask]> =3D3D=
>
>>> wrote:
>>>>> =3D3D3D20
>>>>> so I did that, and now I don=3D3D3D3DE2=3D3D3D3D80=3D3D3D3D99t =
> appear to =3D
>> be able =3D3D
>>> to =3D3D3D
>>>> transmit at =3D3D3D3D
>>>>> all. not sure what=3D3D3D3DE2=3D3D3D3D80=3D3D3D3D99s going on.
>>>>> Thanks.
>>>>> Ashley
>>>>> =3D3D3D20
>>>>>> On Dec 23, 2014, at 2:37 PM, Buddy Brannan <[log in to unmask]> =
> =3D3D3D=3D
>>=20
>>>> wrote:
>>>>>> =3D3D3D3D20
>>>>>> Hi,
>>>>>> =3D3D3D3D20
>>>>>> Likely you=3D3D3D3D3DE2=3D3D3D3D3D80=3D3D3D3D3D99ve turned on =
> CTCSS =3D
>> squelch. Try =3D3D
>>> this:
>>>>>> =3D3D3D3D20
>>>>>> 1) Press menu.
>>>>>> =3D3D3D3D20
>>>>>> 2) Press the # key.
>>>>>> =3D3D3D3D20
>>>>>> 3) Press Enter (next to menu).
>>>>>> =3D3D3D3D20
>>>>>> 4) Press * twice. Then press the number 1. If you get a high =3D
>> pitched =3D3D
>>> =3D3D3D
>>>> =3D3D3D3D3D=3D3D3D3D
>>>>> =3D3D3D20
>>>>>> tone with an error prompt, tones are all turned off. If you =
> =3D3D3D3D
>>>>> don=3D3D3D3D3DE2=3D3D3D3D3D80=3D3D3D3D3D99t,=3D3D3D3D3D
>>>>>> press * until you do.
>>>>>> =3D3D3D3D20
>>>>>> 5) Press enter again.
>>>>>> =3D3D3D3D20
>>>>>> 6) Rotate the selector knob once clockwise and repeat above steps =
> =3D
>> to =3D3D
>>> =3D3D3D
>>>> =3D3D3D3D
>>>>> be =3D3D3D3D3D
>>>>>> sure receive CTCSS is off.=3D3D3D3D3D20
>>>>>> =3D3D3D3D20
>>>>>> =3D3D3D3D20
>>>>>> =3D3D3D3D3DE2=3D3D3D3D3D80=3D3D3D3D3D94=3D3D3D3D3D20
>>>>>> Buddy Brannan, KB5ELV - Erie, PA
>>>>>> Phone: 814-860-3194=3D3D3D3D3D20
>>>>>> Mobile: 814-431-0962
>>>>>> Email: [log in to unmask]
>>>>>> =3D3D3D3D20
>>>>>> =3D3D3D3D20
>>>>>> =3D3D3D3D20
>>>>>>> On Dec 23, 2014, at 2:26 PM, Ashley Bernard <[log in to unmask]> =3D=
>
>> =3D3D3D3D=3D3D
>>> =3D20
>>>>> wrote:
>>>>>>> =3D3D3D3D3D20
>>>>>>> Hi list,
>>>>>>> In my exploration with repeaters and radio operation, =3D3D3D3D3D
>>>>>> I=3D3D3D3D3D3DE2=3D3D3D3D3D3D80=3D3D3D3D3D3D99ve=3D3D3D3D3D3D
>>>>>>> managed to mess up my audio on my puxing ht. The speech output =
> =3D3D
>>> works =3D3D3D
>>>> =3D3D3D3D
>>>>> =3D3D3D3D3D3D=3D3D3D3D3D
>>>>>> =3D3D3D3D20
>>>>>>> fine, and when I hit the PTT button I can tell my transmission =3D
>> went =3D3D
>>> =3D3D3D
>>>> =3D3D3D3D
>>>>> =3D3D3D3D3D3D
>>>>>>> through by listening from another radio, but =3D3D
>>> I=3D3D3D3D3D3DE2=3D3D3D3D3D3D80=3D3D3D3D3D3=3D3D3D
>>>> D99m =3D3D3D3D
>>>>> =3D3D3D3D3D
>>>>>> receiving no =3D3D3D3D3D3D
>>>>>>> audio on the puxing side. If anyone knows a reset function or =
> =3D3D3D
>>>> another =3D3D3D3D
>>>>> =3D3D3D3D3D
>>>>>> =3D3D3D3D3D3D
>>>>>>> way to fix this problem it would be much appreciated.
>>>>>>> Ashley (KC1CPS)=3D3D3D3D3D3D=3D20=20
|
