thanks very much John.
I'll try the fix later today and post results.
73
Colin, V A6BKX
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, October 09, 2010 6:30 AM
Subject: Re: ICT90A programming software?
>I found the fix, you have to replace the VSPRINT.OCX file, and one other,
> found together on the website I'll post at the end of this message, once
> you
> download these 2 files, put them in your c:\windows\system32 folder, or
> equivelent, as specified by the instructions on the web site, I just did
> this myself and the program works fine now. The site is:
> http://www.legacyfamilytree.com/helpDLL-OCXerrors.asp
> ----- Original Message -----
> From: "colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, October 09, 2010 2:40 AM
> Subject: Re: ICT90A programming software?
>
>
>> i've got hundreds.
>> no idea which one to even look at...you have to look up each individual
>> update up on the microsoft website, and even then, it doesn't always
>> clearly
>> tell you the date it was issued.
>> frustrating.
>> I did a google on the runtime 339 error, and all I found was
>> recommendations
>> for reg cleaners that you have to pay for that will solve all your
>> computer
>> ails, and even pour you a tall glass of your favorite beer while your
>> waiting for the regb clean to finish.
>> no doubt they'll also cook dinner, do the laundry and other adult related
>> tasks at the same time.
>> anyway, john, if you can find or remember something about the update you
>> removed, if not the number, than perhaps what it was for or what
>> particular
>> issue it addressed?
>> I don't really want to try and do a system restore to over a year ago.
>> probably don't even have a restore point set for that far back.
>> I can still program the radio easily enough, but the programming software
>> is
>> nice to use if one has it.
>> BTW, the OPC478 icom programming cable doesn't happen to work with the th
>> F6A does it?
>> 73
>> Colin, V A6BKX
>> ----- Original Message -----
>> From: "Butch Bussen" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, October 08, 2010 11:15 PM
>> Subject: Re: ICT90A programming software?
>>
>>
>>> If you find out what update to uninstall, let me know.
>>> THanks.
>>> 73
>>> Butch Bussen
>>> wa0vjr
>>> open Node 3148
>>> Las Vegas
>>>
>>>
>>> On Fri, 8 Oct
>>> 2010, colin McDonald wrote:
>>>
>>>> hmmm, i'll give that a shot...hopefully I can uninstall the particular
>>>> update without compremising all the subsequent updates.
>>>> It's odd Icom or someone hasn't written an update patch for that
>>>> software...guess since the IC T90 is no longer in production, they
>>>> could
>>>> care less.
>>>> i'm happy I got the HT working again though, I've missed that little
>>>> guy.
>>>> 73
>>>> Colin, V A6BKX
>>>> ----- Original Message -----
>>>> From: "John Miller" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, October 08, 2010 12:29 PM
>>>> Subject: Re: ICT90A programming software?
>>>>
>>>>
>>>>> that's caused by a windows update, it happened to all my computers aw
>>>>> well.
>>>>> ----- Original Message -----
>>>>> From: "colin McDonald" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Friday, October 08, 2010 1:39 PM
>>>>> Subject: ICT90A programming software?
>>>>>
>>>>>
>>>>>> Hey All:
>>>>>> well, I got my IC T90A up and running again...had to pull out the
>>>>>> little
>>>>>> circuit board that is for over charge protection and voltage
>>>>>> regulation
>>>>>> out
>>>>>> of the battery case, and all is well now...at least it works until I
>>>>>> can
>>>>>> get
>>>>>> a new battery.
>>>>>> So, i went to reprogram my IC T90A using the cst90a software and
>>>>>> OPC478
>>>>>> cable I got with the radio originally, and at some point in the last
>>>>>> year
>>>>>> and a half, the programming software on the computer has become
>>>>>> corrupted.
>>>>>> When I try to open the CST90 software, i get a "Run-time error 339,
>>>>>> VSPRINT7.OCX" is invalid or the file is missing.
>>>>>> Not sure how this happened as I haven't removed anything to do with
>>>>>> the
>>>>>> programming software.
>>>>>> It was working last time I used it like I said, about a year and
>>>>>> ahalf
>>>>>> ago.
>>>>>> So, I did a google search to see if I could redownload the software,
>>>>>> but
>>>>>> apparently it's only availible on CD from ICom or at least, from one
>>>>>> of
>>>>>> icoms dealers.
>>>>>> So, I have a registered copy of the software, the right cable, but I
>>>>>> can't
>>>>>> program the radio.
>>>>>> I don't know where my original programming cd is after 3 moves, and I
>>>>>> highly
>>>>>> doubt I can just call and ask for another copy as I probably didn't
>>>>>> bother
>>>>>> to register the thing originally.
>>>>>> So, i'm wondering if anyone has the cst90 software that they can zip
>>>>>> up
>>>>>> and
>>>>>> send me so I can see if i can get this thing going again.
>>>>>> I can always reprogram manually, not a huge deal, but I would like to
>>>>>> use
>>>>>> the software as I have the right cable etc.
>>>>>> it's already been perchased for my use, so I'm not requesting to
>>>>>> pirate
>>>>>> the
>>>>>> software, I just need a uncorrupted version is all.
>>>>>> 73
>>>>>> Colin, V A6BKX
>>>>
>>>>
|
