I'll look back and see if I made a note of it, I probably did but on the
computer I use to program radios, until it really started having problems
but I'll look. And, nope, sorry same cable doesn't work with the TH-F6A,
totally different cable.
----- Original Message -----
From: "colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, October 09, 2010 2:40 AM
Subject: Re: ICT90A programming software?
> i've got hundreds.
> no idea which one to even look at...you have to look up each individual
> update up on the microsoft website, and even then, it doesn't always
> clearly
> tell you the date it was issued.
> frustrating.
> I did a google on the runtime 339 error, and all I found was
> recommendations
> for reg cleaners that you have to pay for that will solve all your
> computer
> ails, and even pour you a tall glass of your favorite beer while your
> waiting for the regb clean to finish.
> no doubt they'll also cook dinner, do the laundry and other adult related
> tasks at the same time.
> anyway, john, if you can find or remember something about the update you
> removed, if not the number, than perhaps what it was for or what
> particular
> issue it addressed?
> I don't really want to try and do a system restore to over a year ago.
> probably don't even have a restore point set for that far back.
> I can still program the radio easily enough, but the programming software
> is
> nice to use if one has it.
> BTW, the OPC478 icom programming cable doesn't happen to work with the th
> F6A does it?
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, October 08, 2010 11:15 PM
> Subject: Re: ICT90A programming software?
>
>
>> If you find out what update to uninstall, let me know.
>> THanks.
>> 73
>> Butch Bussen
>> wa0vjr
>> open Node 3148
>> Las Vegas
>>
>>
>> On Fri, 8 Oct
>> 2010, colin McDonald wrote:
>>
>>> hmmm, i'll give that a shot...hopefully I can uninstall the particular
>>> update without compremising all the subsequent updates.
>>> It's odd Icom or someone hasn't written an update patch for that
>>> software...guess since the IC T90 is no longer in production, they could
>>> care less.
>>> i'm happy I got the HT working again though, I've missed that little
>>> guy.
>>> 73
>>> Colin, V A6BKX
>>> ----- Original Message -----
>>> From: "John Miller" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, October 08, 2010 12:29 PM
>>> Subject: Re: ICT90A programming software?
>>>
>>>
>>>> that's caused by a windows update, it happened to all my computers aw
>>>> well.
>>>> ----- Original Message -----
>>>> From: "colin McDonald" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, October 08, 2010 1:39 PM
>>>> Subject: ICT90A programming software?
>>>>
>>>>
>>>>> Hey All:
>>>>> well, I got my IC T90A up and running again...had to pull out the
>>>>> little
>>>>> circuit board that is for over charge protection and voltage
>>>>> regulation
>>>>> out
>>>>> of the battery case, and all is well now...at least it works until I
>>>>> can
>>>>> get
>>>>> a new battery.
>>>>> So, i went to reprogram my IC T90A using the cst90a software and
>>>>> OPC478
>>>>> cable I got with the radio originally, and at some point in the last
>>>>> year
>>>>> and a half, the programming software on the computer has become
>>>>> corrupted.
>>>>> When I try to open the CST90 software, i get a "Run-time error 339,
>>>>> VSPRINT7.OCX" is invalid or the file is missing.
>>>>> Not sure how this happened as I haven't removed anything to do with
>>>>> the
>>>>> programming software.
>>>>> It was working last time I used it like I said, about a year and ahalf
>>>>> ago.
>>>>> So, I did a google search to see if I could redownload the software,
>>>>> but
>>>>> apparently it's only availible on CD from ICom or at least, from one
>>>>> of
>>>>> icoms dealers.
>>>>> So, I have a registered copy of the software, the right cable, but I
>>>>> can't
>>>>> program the radio.
>>>>> I don't know where my original programming cd is after 3 moves, and I
>>>>> highly
>>>>> doubt I can just call and ask for another copy as I probably didn't
>>>>> bother
>>>>> to register the thing originally.
>>>>> So, i'm wondering if anyone has the cst90 software that they can zip
>>>>> up
>>>>> and
>>>>> send me so I can see if i can get this thing going again.
>>>>> I can always reprogram manually, not a huge deal, but I would like to
>>>>> use
>>>>> the software as I have the right cable etc.
>>>>> it's already been perchased for my use, so I'm not requesting to
>>>>> pirate
>>>>> the
>>>>> software, I just need a uncorrupted version is all.
>>>>> 73
>>>>> Colin, V A6BKX
>>>
>>>
|
