You got all but the lanniard already, if you want rid of it, we can arrange
it, dd.
----- Original Message ----- 
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, June 04, 2006 2:02 PM
Subject: Re: ict90


> Hi Danny;
> I never put the belt clip assembly on the t-90 when I got it a year or so
> ago and of course I haven't been able to locate it.  Supposedly I bought
the
> belt clip and related parts but when the stuff arrived I only got the belt
> clip with a round knob on the back and one screw.  If you run across
anyone
> who has the entire assembly they want to part with keep me in mind.
> Rich.
> ----- Original Message ----- 
> From: "Danny Dyer" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, June 04, 2006 12:04 AM
> Subject: Re: ict90
>
>
> Hi Rich, Re the beltclip assembly, there are four pieces.
> 1, a knob type mount over which the clip itself mounts, the knob, if you
> will, has a hole for one screw in its' center, and another hole through
it,
> at the top, through which the lanniard or handstrap passes.
> 2, the clip itself, which slides over the knob/previously atatched to the
> radio via the screw.
> 3, the screw which atatches the knob/mount to the radio, and of course,
> strengthens support for the clip.
> and 4, the lanniard/handstrap, the short loop end of which slips through
the
> hole in the top of the knobmount, preferably before the screw and clip are
> firmly atatched.
> (Note, I've been told that the propencity for the clip to slip off the
knob,
> when the radio is turned upside down on the belt of the wearer, can be
> seriously cut back by using a rubber band somehow slid around the slide on
> part of the clip knob combo, but I've not had the chance to try it, as
mine
> didn't come with the clip, only the knobmount+screw+lanniard.  I'm using a
> 2screw hole 1piedce metal beltclip similar to, if not the same one, used
on
> the IC24at and 2sat series of radios, though would like to find one of the
> original t90 clips to use with the radio, using the rubber band trick.
>    In terms of a quick start, handihams has an mp3 and or text file, from
> IcanWorkThisThing.com and or BiblesFor The Blind, which does pretty well.
> If you've got a line on a braille quickstart file that's different than
> those, I'd love to find a copy also.  Thanks, Danny Dyer, wb4idu.
> ----- Original Message ----- 
> From: "Richard Fiorello" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, June 03, 2006 4:24 PM
> Subject: ict90
>
>
> > Hi;
> > Dusted off my ict90 and was showing it to a friend and a question or two
> > came up.  First of all, I was looking at diamond and comet for a rubber
> duck
> > that would out perform the one that comes with the radio.  There were
far
> to
> > many choices.  If anyone has any specific suggestions I'd be interested.
> > Secondly I never did figure out the belt clip.  I got the clip and one
> screw
> > and there must be another part.
> > Finally I have a short braille quick start guide for the radio that has
> been
> > wonderful.  I wonder if it is possible to get another copy for a friend
> who
> > is thinking about spending some cash?
> > Thanks in advance
> > Rich
> >
>