Steve,
Very impressive resource. Thanks for sharing.
Steve
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, January 05, 2013 12:11
Subject: Re: It's Here!
> Hi Albert,
>
> Different Steve here. Glad it is working for you.
>
> Here is the page for Kenwood software downloads:
>
> http://www.kenwood.com/i/products/info/amateur/software_download.html
>
> Look down the page for the 590 stuff. The control program is the ARCP
> 590 software, if you intend to use the USB port on the back of the rig,
> you also have to install the "virtual comm port driver" which is also
> found here. There is another one called " USB audio controller, which
> you don't have to worry about.
>
> If you have a serial port on the pc, you can use the serial port on the
> 590 to run ARCP 590 or other third party software, but if you are doing
> the USB connection, you have to use the virtual comm driver.
>
> On another note, here is a great resource page for the 590:
>
>
> http://homepage.ntlworld.com/wadei/ts-590s.htm
>
>
> 73, Steve KW3A
> On 1/5/2013 11:55 AM, Albert Sanchez wrote:
>> Hi Steve
>> Always good to hear from ya! I got the files from I can work this thing
>> so I
>> think I'm ok! Had my first qso on 40 late last night (or maybe I should
>> have
>> said early this morning) with a guy in GA. Good solid S9 sigs each way! I
>> found a USB cable in my junk drawer so now I need to find the software to
>> control the rig from my laptop, any idea where to look?
>> Can you get on 40 meters? Maybe we can set up a schedule for sometime
>> this
>> weekend?
>> Best 73's,
>> Albert WA7FXB
>> ----- Original Message -----
>> From: "Steve" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, January 05, 2013 10:54 AM
>> Subject: Re: It's Here!
>>
>>
>>> Al,
>>>
>>> I don't remember what is on ICanWorkThisThing.com but if you need a menu
>>> listing or key reference, let me know. I have it as a .bns file so I
>>> can
>>> snag it and send it to you as an attachment off-list.
>>>
>>> Steve, K8SP
>>> ----- Original Message -----
>>> From: "Tom Behler" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, January 04, 2013 8:41 PM
>>> Subject: Re: It's Here!
>>>
>>>
>>>> Well, have at it, and enjoy your week-end!
>>>>
>>>> You may not get much sleep, but that's ok.
>>>>
>>>> It's all in the spirit of ham radio fun.
>>>>
>>>> Tom Behler: KB8TYJ
>>>>
>>>> ----- Original Message -----
>>>> From: "Albert Sanchez" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, January 04, 2013 7:08 PM
>>>> Subject: Re: It's Here!
>>>>
>>>>
>>>>> Hi Tom!
>>>>> My friend Larry, w4rhy, came by this afternoon on his way home from
>>>>> work
>>>>> and
>>>>> showed me how to hook up the rig to a new power supply (I was not sure
>>>>> which
>>>>> cable was gnd etc. Now the fun begins!
>>>>> A.S. WA7FXB
>>>>> ----- Original Message -----
>>>>> From: "Tom Behler" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Friday, January 04, 2013 6:37 PM
>>>>> Subject: Re: It's Here!
>>>>>
>>>>>
>>>>>> Albert:
>>>>>>
>>>>>> Trust me, you're gonna love it!
>>>>>>
>>>>>> Tom Behler: KB8TYJ
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "Albert Sanchez" <[log in to unmask]>
>>>>>> To: <[log in to unmask]>
>>>>>> Sent: Friday, January 04, 2013 10:02 AM
>>>>>> Subject: It's Here!
>>>>>>
>>>>>>
>>>>>>> Hi All
>>>>>>> I'm pleased to let you all know that the TS-590 arrived last night =
>>>>>>> around 8:30PM. Haven't taken it out of the box yet A.S., wa7fxb
>>>>>>>
>>>>>
>>
>>
>>
>
|
