That did it Steve.  Didn't realize that it took 3 digits.  Gary KB2YAA
----- Original Message ----- 
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, February 23, 2009 9:00 PM
Subject: Re: Kenwood TMV71A


> Gary,
>
> In order for this to work, one of the PF keys on the mic must be defined 
> as
> the Enter key.  Assuming you've done that, do the following:
>
> Press the button immediately above the Tuning knob to put the radio into
> Memory mode.  Then press the PF key you've defined as Enter.  Then, enter
> the number of the memory you want (e.g. 001).  If you enter less than 
> three
> digits, you'll need to press Enter.  Otherwise, you'll hear a long beep
> indicating that you've completed the entry.
>
> Steve
>
> ----- Original Message ----- 
> From: "GARY TILLINGHAST" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, February 23, 2009 20:06
> Subject: Kenwood TMV71A
>
>
>> Hi all,
>> Did anyone ever find out how to change from one memory channel to another
>> without using the up or down buttons.   I thought I remember that you
>> could
>> do it from the keypad on the microphone.  Gary KB2YAA
>>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.3/1967 - Release Date: 02/23/09 
07:17:00